Bath Interferometer XYZ Table kit

Description

All the parts you need to build a nice XYZ stage for a Bath Interferometer or other optical stage.

Missing:

• tools including a metal file (see assembly instructions at bottom for tool list)
• interferometer

Included:

• 1/4 inch metal rods precut to fit
• brass tubing pieces to go around the 1/4 inch rods
• precut 8-32 threaded rods
• 4 8-32 nuts
• 6 8-32 lock nuts
• a long 8-32 screw for purposes of tapping the plastic parts
• two short M3 screws that will hold down equipment to the top of the XYZ table

The parts are very rough cut and sharp. You will need to clean up the cuts (and the inside of the brass tubes) using a file just like the one pictured. You can stick the “handle” of the file inside the brass tubes to clean them up.

Plastic parts will start to slump/melt at 50C. Do not leave in car on hot day. Contact me if this is a problem.  Usually if you order when weather is hot (your location or mine) I use higher temp plastics.

Part colors will most likely not be black – they might be any color

Assembly instructions: http://gr5.org/xyz/