Search results for 'pt 100'

It's not the one from Ultimaker. This is my version of their upgrade kit. Much less expensive - please read description below.

Set qty to zero for what you already have or don't want and then "add to cart".

PLEASE READ FULL DESCRIPTION BELOW. Learn More

1mm nozzle for really fast prints. If you plan to do .5mm layer height it's recommended to also get a 35W or 40W heater.

These nozzles are e3dv6 compatible meaning they work with all versions of the Olsson block including the one on the Ultimaker 2+. They work on other reprap printers also.

The JET RSB have a revised tip angle, revised jet shoulder width and revised internal geometry, with a gentle slope leading down to the exit. They are also slippery inside, due to a special treatment.

These new nozzles are meant for Speed! Plastic will flow more easily than in most other nozzles. Atomic pulls work very well! The inside geometry makes it much harder for plastic to “hide in the corners”, so changing color/filament type will be quicker and safer.

For "3mm" filament (not 1.75mm filament). Learn More

This contains parts you need to do the Mark 2 dual head upgrade (except the head fans). Details on the Mark2 are here:

https://magnetic-tool-changer.com/

The above website has the complete bom (on github) and detailed instructions. Everything in the photo is included. I purchased this part from this link here:
https://www.aliexpress.com/item/Mark-2-board-hotend-extruder-kit-for-Ultimaker-2-3d-printer-dual-extrusion-full-kit/32829918859.html

I gave this kit to 2 people to try out and they both said the same thing. Everything worked perfectly except the print head fans. You will need to get the 2 print head cooling fans (not the 3rd head cooling fan - just the side 2 fans) yourself. I also tested the fans myself and indeed they do not work. So I recommend you get the part number off your existing fans and order 2 of them through digikey. Or possibly fbrc8.com if you want them with the connectors already mounted.

FOR USA CUSTOMERS ONLY - OTHER CUSTOMERS PLEASE ORDER THROUGH aliexpress.com Learn More

Slippery “ICE” nozzle, with brass core. Optimized for surface prints. Max temp 275C. First 2 hours max 220C to temper the nozzle. Super Easy Cold-Pulls! Has an outer geometry optimized for surfaces. This is a brass nozzle (excellent temperature properties) with a hard slippery “ICE” coating. This coating prevents hot plastic from sticking to it! If you heat it to more than 275C, it destroys this function and the nozzle acts like a “normal” nozzle. IMPORTANT: This ICE nozzle looks like a (dark) steel nozzle, but it is a brass nozzle! This means it prints just like a standard brass nozzles (several times faster than steel nozzles). Fits UM2, UM2+, Olsson Block, Matchless V3 Learn More

Slippery “ICE” nozzle, with brass core. Optimized for surface prints. Max temp 275C. First 2 hours max 220C to temper the nozzle. Super Easy Cold-Pulls!

Has an outer geometry optimized for surfaces. This is a brass nozzle (excellent temperature properties) with a hard slippery “ICE” coating. This coating prevents hot plastic from sticking to it! If you heat it to more than 275C, it destroys this function and the nozzle acts like a “normal” nozzle.

IMPORTANT: This ICE nozzle looks like a (dark) steel nozzle, but it is a brass nozzle! This means it prints just like a standard brass nozzles (several times faster than steel nozzles). Fits UM2, UM2+, Olsson Block, Matchless V3 Learn More

Replaces Ultimaker2 teflon part. This is made of PTFE but it's a high temperature teflon. First there was regular PTFE (both Ultimaker and 3dsolex). Then there was "TFT" (3dsolex and soon after Ultimaker). Now there is "TFN". TFN lasts about the same amount of time as TFT depending on temperature. Learn More

SS ICE coated nozzle does not stick to your filament! Will not carry blobs of PLA or any other filament around your print! Super easy Cold Pull! 0.50mm size can have an advantage with certain difficult, fibrous filaments, less clogging. Lasts even longer than stainless steel nozzles. For some users it will “payback” after first use! For UM2/ UM2+ Learn More