Search results for 'um2 go'
-
$15.00ALL BATH INTERFEROMETER PRODUCTS HAVE BEEN MOVED TO MY NEW STORE HERE:
https://thegr5store.com/wp/Learn More -
$9.80.25mm JET RSB Nozzle. Compatible with e3d v6 nozzles designed for 3mm filament. Learn More -
$65.00Super hard nozzle. Made from ruby or sapphire. Sapphire and ruby are one level softer on the hardness scale from Diamond. Print many spools of CF filament with no wear.These work on UM2, UM2+ and will work on UMO if you change or remove the fan shroud and readjust Z home position.
Also compatible with Raise3D, Printrbot, Lulzbot. These are e3dv6 style compatible nozzles. Learn More
-
$95.00DDG Extruder for Ultimaker2 that feeds filament without grinding and with a very firm grip of the filament that will allow for faster printing without under-extrusion problems and also high retraction prints like Voroni models without grinding. Learn More -
$29.00ALL BATH INTERFEROMETER PRODUCTS HAVE BEEN MOVED TO MY NEW STORE HERE:
https://thegr5store.com/wp/Every laser comes with a calibration card telling you the wavelength (every laser is a little different - usually 650 to 660nm). Every laser runs on normal USB power (5v) which comes from phone chargers, USB cigarette adapters, USB batteries, computers, laptops, etc. Comes with 1 meter long power cord. You must supply your own USB power source.This laser has 2 advantages over the cheaper laser I sell: larger beam and glass lens.
The glass lens means it is easy to clean without scratching. The other laser I sell has a plastic lens secured with a spring and the spring scratches the lens more and more every time you take it apart. This laser doesn't have any spring touching the lens.
More info below in description!
Learn More -
$18.90Much more resistant to breaking. Precisely engineered. If you lose the original on the floor, it may break or bend. When turning, it may break.The V2 is much stronger. Learn More -
$2.00ALL BATH INTERFEROMETER PRODUCTS HAVE BEEN MOVED TO MY NEW STORE HERE:
https://thegr5store.com/wp/Learn More -
$18.90Insulator - for Ultimaker2 - goes between white teflon isolator and heater block (Olsson or Ultimaker). Learn More -
$18.90Replaces Ultimaker Original (not Ultimaker2) teflon part but this part can print at 255C continuous for years. Never replace your teflon part again. This is made of teflon but it's a high temperature teflon. Learn More -
$129.00Out of stock
This contains parts you need to do the Mark 2 dual head upgrade (except the head fans). Details on the Mark2 are here:https://magnetic-tool-changer.com/
The above website has the complete bom (on github) and detailed instructions. Everything in the photo is included. I purchased this part from this link here:
https://www.aliexpress.com/item/Mark-2-board-hotend-extruder-kit-for-Ultimaker-2-3d-printer-dual-extrusion-full-kit/32829918859.htmlI gave this kit to 2 people to try out and they both said the same thing. Everything worked perfectly except the print head fans. You will need to get the 2 print head cooling fans (not the 3rd head cooling fan - just the side 2 fans) yourself. I also tested the fans myself and indeed they do not work. So I recommend you get the part number off your existing fans and order 2 of them through digikey. Or possibly fbrc8.com if you want them with the connectors already mounted.
FOR USA CUSTOMERS ONLY - OTHER CUSTOMERS PLEASE ORDER THROUGH aliexpress.com Learn More