Welcome to gr5 store

Search results for 'the'

Grid List

Set Descending Direction

1-10 of 47

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. 0.25 JET RSB nozzle
    $9.80
    .25mm JET RSB Nozzle. Compatible with e3d v6 nozzles designed for 3mm filament. Learn More
  2. HardCore EVERLAST .60mm nozzle for UM3/S3/S5
    $65.00
    Super hard nozzle. Made from ruby or sapphire. Sapphire and ruby are one level softer on the hardness scale from Diamond. Print many spools of CF filament with no wear.

    You must have the 3DSolex Hardcore to use this nozzle.

    These work on UM3, S3 and S5 only. Learn More

  3. Ultimaker 3/S3/S5 Core - printcore (was hardcore) Sapphire Everlast .60mm Kit
    $275.00

    Print core for UM S3, S5 and UM3 with REPLACEABLE NOZZLES!
    Kit ships with 2 x .60mm Sapphire nozzles.
    Other sizes available!

    Learn More
  4. Heated Bed Kit for UM2GO
    $40.00
    Wow - heated bed conversion kit for UM2GO! Includes everything you need: Peel-and-stick heater with temp sensor, firmware. Instructions and more details are here.

    This is version 2 of the kit which is cheaper, easier to install (version 1 required installing a new nozzle heater) and it smells better (I found the silicone version was a little stinky when printing ABS - although the ABS also smells bad). Learn More

  5. Bondtech DDG Extruder (Feeder) for Ultimaker 2+ -2.85/3mm Filament
    $95.00
    DDG Extruder for Ultimaker2 that feeds filament without grinding and with a very firm grip of the filament that will allow for faster printing without under-extrusion problems and also high retraction prints like Voroni models without grinding. Learn More
  6. Splitter cube for Bath Interferometer
    $35.00

    ALL BATH INTERFEROMETER PRODUCTS HAVE BEEN MOVED TO MY NEW STORE HERE:

    https://thegr5store.com/wp/Learn More
  7. I2K Insulator
    $18.90
    Insulator - for Ultimaker2 - goes between white teflon isolator and heater block (Olsson or Ultimaker). Learn More
  8. EVERLAST 0.60mm nozzle for UM2, Raise3D, Printrbot, Lulzbot and others
    $65.00
    Super hard nozzle. Made from ruby or sapphire. Sapphire and ruby are one level softer on the hardness scale from Diamond. Print many spools of CF filament with no wear.

    These work on UM2, UM2+ and will work on UMO if you change or remove the fan shroud and readjust Z home position.

    Also compatible with Raise3D, Printrbot, Lulzbot. These are e3dv6 style compatible nozzles. Learn More

  9. Bath Interferometer (no optics)
    $30.00

    ALL BATH INTERFEROMETER PRODUCTS HAVE BEEN MOVED TO MY NEW STORE HERE:

    https://thegr5store.com/wp/http://gr5.org/bath/

    Customized for your lens and laser: send me a mechanical drawing of the lens you plan to use and I'll make a custom holder for it. Similarly with the laser - usually all I need to know is the diameter of the end of the laser but if you send me a drawing or measurements I will try to make it fit nicely.

    You will need an XYZ table which I also sell.

    Hex driver included.

    Colors of plastic parts most likely will not match photo (I use whatever colors are convenient). The white parts in the photo are nylon. The other parts are PLA which will melt in a hot car in the summer. If you need this to withstand high temperatures let me know and I'll add $10 to the price and give you one printed from PET or similar. Learn More

  10. 1.0mm JET RSB nozzle
    $9.80
    1mm nozzle for really fast prints. If you plan to do .5mm layer height it's recommended to also get a 35W or 40W heater.

    These nozzles are e3dv6 compatible meaning they work with all versions of the Olsson block including the one on the Ultimaker 2+. They work on other reprap printers also.

    The JET RSB have a revised tip angle, revised jet shoulder width and revised internal geometry, with a gentle slope leading down to the exit. They are also slippery inside, due to a special treatment.

    These new nozzles are meant for Speed! Plastic will flow more easily than in most other nozzles. Atomic pulls work very well! The inside geometry makes it much harder for plastic to “hide in the corners”, so changing color/filament type will be quicker and safer.

    For "3mm" filament (not 1.75mm filament). Learn More

Grid List

Set Descending Direction

1-10 of 47

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5