Search results for 'JET Set 4 (Set of 4 JET RSB Nozzles)'
-
$275.00
Print core for UM S3, S5 and UM3 with REPLACEABLE NOZZLES!
Learn More
Kit ships with 2 x .60mm Sapphire nozzles.
Other sizes available! -
$9.80.25mm JET RSB Nozzle. Compatible with e3d v6 nozzles designed for 3mm filament. Learn More
-
$65.00Super hard nozzle. Made from ruby or sapphire. Sapphire and ruby are one level softer on the hardness scale from Diamond. Print many spools of CF filament with no wear.
You must have the 3DSolex Hardcore to use this nozzle.
These work on UM3, S3 and S5 only. Learn More
-
$195.00This needs to be paired with a 1.75mm hardcore - email us for details: thegr5store@gmail.com
This feeder expects a 1/4 inch (6.35mm) O.D. bowden tube - not the typical 4mm O.D. bowden tube for 1.75mm filament.
DDG Extruder for Ultimaker3 that feeds filament without grinding and with a very firm grip of the filament that will allow for faster printing without under-extrusion problems and also high retraction prints like Voroni models without grinding. Learn More
-
$29.00
ALL BATH INTERFEROMETER PRODUCTS HAVE BEEN MOVED TO MY NEW STORE HERE:
https://thegr5store.com/wp/Every laser comes with a calibration card telling you the wavelength (every laser is a little different - usually 650 to 660nm). Every laser runs on normal USB power (5v) which comes from phone chargers, USB cigarette adapters, USB batteries, computers, laptops, etc. Comes with 1 meter long power cord. You must supply your own USB power source.This laser has 2 advantages over the cheaper laser I sell: larger beam and glass lens.
The glass lens means it is easy to clean without scratching. The other laser I sell has a plastic lens secured with a spring and the spring scratches the lens more and more every time you take it apart. This laser doesn't have any spring touching the lens.
More info below in description!
Learn More -
$16.50
Replaces Ultimaker2 teflon part. This is made of PTFE but it's a high temperature teflon. First there was regular PTFE (both Ultimaker and 3dsolex). Then there was "TFT" (3dsolex and soon after Ultimaker). Now there is "TFN". TFN lasts about the same amount of time as TFT depending on temperature. Learn More
-
$30.00
ALL BATH INTERFEROMETER PRODUCTS HAVE BEEN MOVED TO MY NEW STORE HERE:
https://thegr5store.com/wp/http://gr5.org/bath/Customized for your lens and laser: send me a mechanical drawing of the lens you plan to use and I'll make a custom holder for it. Similarly with the laser - usually all I need to know is the diameter of the end of the laser but if you send me a drawing or measurements I will try to make it fit nicely.
You will need an XYZ table which I also sell.
Hex driver included.
Colors of plastic parts most likely will not match photo (I use whatever colors are convenient). The white parts in the photo are nylon. The other parts are PLA which will melt in a hot car in the summer. If you need this to withstand high temperatures let me know and I'll add $10 to the price and give you one printed from PET or similar. Learn More
-
$18.90Insulator - for Ultimaker2 - goes between white teflon isolator and heater block (Olsson or Ultimaker). Learn More
-
$65.00Super hard nozzle. Made from ruby or sapphire. Sapphire and ruby are one level softer on the hardness scale from Diamond. Print many spools of CF filament with no wear.
These work on UM2, UM2+ and will work on UMO if you change or remove the fan shroud and readjust Z home position.
Also compatible with Raise3D, Printrbot, Lulzbot. These are e3dv6 style compatible nozzles. Learn More
-
$223.00100% 3DSolex parts. Compatible with Ultimaker 3, S3 and S5 Printers
You get a complete core already upgraded to include the 3DSolex hardcore heater block which lets you change nozzles. Included nozzles:
- .25mm
- .40mm (race)
- .60mm (race)
- .80mm (race)