ALL BATH INTERFEROMETER PRODUCTS HAVE BEEN MOVED TO MY NEW STORE HERE:

https://thegr5store.com/wp/http://gr5.org/bath/

Customized for your lens and laser: send me a mechanical drawing of the lens you plan to use and I'll make a custom holder for it. Similarly with the laser - usually all I need to know is the diameter of the end of the laser but if you send me a drawing or measurements I will try to make it fit nicely.

You will need an XYZ table which I also sell.

Hex driver included.

Colors of plastic parts most likely will not match photo (I use whatever colors are convenient). The white parts in the photo are nylon. The other parts are PLA which will melt in a hot car in the summer. If you need this to withstand high temperatures let me know and I'll add $10 to the price and give you one printed from PET or similar. Learn More

.25mm JET RSB Nozzle. Compatible with e3d v6 nozzles designed for 3mm filament. Learn More

Super hard nozzle. Made from ruby or sapphire. Sapphire and ruby are one level softer on the hardness scale from Diamond. Print many spools of CF filament with no wear.

These work on UM2, UM2+ and will work on UMO if you change or remove the fan shroud and readjust Z home position.

Also compatible with Raise3D, Printrbot, Lulzbot. These are e3dv6 style compatible nozzles. Learn More

Race nozzles heat filament much more thoroughly than regular matchless nozzles due to their internal structure. Allows you to print at lower temperatures or faster. Compatible with 1.75mm Olsson block, 1.75mm block v3, printrbot UBIS 13S, Raise3D or other e3dv6 nozzles.

For 1.75mm filament (not 3mm filament).

If you use this nozzle on an ultimaker you must have a 1.75mm filament Olsson block or block v3 (a conversion kit).

Works also with Raise 3D N2 printers. Learn More

ALL BATH INTERFEROMETER PRODUCTS HAVE BEEN MOVED TO MY NEW STORE HERE:

https://thegr5store.com/wp/Learn More

Much more resistant to breaking. Precisely engineered. If you lose the original on the floor, it may break or bend. When turning, it may break.The V2 is much stronger. Learn More

ALL BATH INTERFEROMETER PRODUCTS HAVE BEEN MOVED TO MY NEW STORE HERE:

https://thegr5store.com/wp/

All the parts you need to build a nice XYZ stage for a Bath Interferometer or other optical stage.

Missing:

• tools including a metal file (see assembly instructions at bottom for tool list)
• interferometer

Included:

• 1/4 inch metal rods precut to fit
• brass tubing pieces to go around the 1/4 inch rods
• precut 8-32 threaded rods
• 4 8-32 nuts
• 6 8-32 lock nuts
• a long 8-32 screw for purposes of tapping the plastic parts
• two short M3 screws that will hold down equipment to the top of the XYZ table

Learn More

Insulator - for Ultimaker2 - goes between white teflon isolator and heater block (Olsson or Ultimaker). Learn More

Convert to 1.75mm! This is experimental. I haven't tried it - I don't know if anyone has. I'm not sure if changing this part alone is enough - it seems like it should be as on the UM2 you only have to change the heating block and the teflon part - certainly you don't need to change the bowden. So I think it will work.

Replaces Ultimaker Original (not Ultimaker2) teflon part but this part can print at 255C continuous for years. Never replace your teflon part again. This is made of teflon but it's a high temperature teflon. Learn More