Search results for '3dsolex the olsson block kit'
-
$75.00 -
$9.801mm nozzle for really fast prints. If you plan to do .5mm layer height it's recommended to also get a 35W or 40W heater.These nozzles are e3dv6 compatible meaning they work with all versions of the Olsson block including the one on the Ultimaker 2+. They work on other reprap printers also.
The JET RSB have a revised tip angle, revised jet shoulder width and revised internal geometry, with a gentle slope leading down to the exit. They are also slippery inside, due to a special treatment.
These new nozzles are meant for Speed! Plastic will flow more easily than in most other nozzles. Atomic pulls work very well! The inside geometry makes it much harder for plastic to “hide in the corners”, so changing color/filament type will be quicker and safer.
For "3mm" filament (not 1.75mm filament). Learn More
-
$25.00ALL BATH INTERFEROMETER PRODUCTS HAVE BEEN MOVED TO MY NEW STORE HERE:
https://thegr5store.com/wp/For people who already have a 3d printer.The metal parts you need to build a nice XYZ stage for a Bath Interferometer or optical stage.
Missing:- plastic parts
- interferometer
- tools including a metal file
- 9/64 inch and 5/32 inch drill bits
- 1/4 inch stainless rods precut to fit
- brass tubing pieces to go around the 1/4 inch rods
- precut 6-32 threaded rods
- 3 6-32 nuts
- 6 6-32 lock nuts
- a long 6-32 screw for purposes of tapping the plastic parts
- two short M3 screws that will hold down equipment to the top of the XYZ table
-
$10.00ALL BATH INTERFEROMETER PRODUCTS HAVE BEEN MOVED TO MY NEW STORE HERE:
https://thegr5store.com/wp/ I won't test your specific lens but I have tested a few of these and they are excellent. They will give you better than 1/50 wave accuracy when using for a Bath Interferometer.Mount for lens is included. Lens will arrive mounted. Learn More
-
$55.00EXPERTS ONLY - 0.10mm JET RSB Nozzle. Compatible with e3d v6 nozzles designed for 3mm filament although this will work with 1.75mm filament also. Learn More -
$68.00For Prusa I3 Mk3.
3DSolex is out of silicone socks so if you don't have any there are plenty of other ways to get those.
This sensational kit for the Prusa I3 Mk3 will transform your printer.
Safely change nozzle using our tools included in kit.
Ramp up plastic output thanks to our patented core heating nozzles and fully utilizing the Bondtech feeder already installed in your printer. By combining nozzle size, layer height and speed you can achieve up to 30 cubics / second.
Learn More -
$12.20 As low as: $12.000.5mm Steel nozzle! Meant for printing abrasive materials. Learn More -
$285.00100% 3DSolex parts. Compatible with Ultimaker 3, S3 and S5 PrintersYou get a complete core already upgraded to include the 3DSolex hardcore heater block which lets you change nozzles. Included nozzles:
- .25mm
- .40mm (race) X 2
- .50mm steel
- .60mm (race)
- .80mm (race)
- 1.0mm (race)
-
$2.00These will work with any Ultimaker printer and many other printers with 6mm wide GT2 belts but these are meant for the Ultimaker Original. Pack of 5. See this video for instructions both on testing your belt tension and installing these tensioners:
Learn More -
$29.00ALL BATH INTERFEROMETER PRODUCTS HAVE BEEN MOVED TO MY NEW STORE HERE:
https://thegr5store.com/wp/Every laser comes with a calibration card telling you the wavelength (every laser is a little different - usually 650 to 660nm). Every laser runs on normal USB power (5v) which comes from phone chargers, USB cigarette adapters, USB batteries, computers, laptops, etc. Comes with 1 meter long power cord. You must supply your own USB power source.This laser has 2 advantages over the cheaper laser I sell: larger beam and glass lens.
The glass lens means it is easy to clean without scratching. The other laser I sell has a plastic lens secured with a spring and the spring scratches the lens more and more every time you take it apart. This laser doesn't have any spring touching the lens.
More info below in description!
Learn More