Search results for 'JET Set 4 (Set of 4 JET RSB Nozzles)'
-
Starting at: $10.00
ALL BATH INTERFEROMETER PRODUCTS HAVE BEEN MOVED TO MY NEW STORE HERE:
https://thegr5store.com/wp/ The interferometer will be assembled. The xyz stage can be bought as a kit which takes 1-3 hours to assemble or you can buy an assembled stage for another $50 for the labor (if in stock).Much more information in description section far below (scroll way down). Learn More
-
$40.00Wow - heated bed conversion kit for UM2GO! Includes everything you need: Peel-and-stick heater with temp sensor, firmware. Instructions and more details are here.This is version 2 of the kit which is cheaper, easier to install (version 1 required installing a new nozzle heater) and it smells better (I found the silicone version was a little stinky when printing ABS - although the ABS also smells bad). Learn More
-
$2.00ALL BATH INTERFEROMETER PRODUCTS HAVE BEEN MOVED TO MY NEW STORE HERE:
https://thegr5store.com/wp/Learn More -
$18.90Convert to 1.75mm! This is experimental. I haven't tried it - I don't know if anyone has. I'm not sure if changing this part alone is enough - it seems like it should be as on the UM2 you only have to change the heating block and the teflon part - certainly you don't need to change the bowden. So I think it will work.Replaces Ultimaker Original (not Ultimaker2) teflon part but this part can print at 255C continuous for years. Never replace your teflon part again. This is made of teflon but it's a high temperature teflon. Learn More
-
$75.00 -
$29.00EXPERTS ONLY - 0.15mm JET RSB Nozzle. Compatible with e3d v6 nozzles designed for 3mm filament. Learn More -
$129.00Out of stock
This contains parts you need to do the Mark 2 dual head upgrade (except the head fans). Details on the Mark2 are here:https://magnetic-tool-changer.com/
The above website has the complete bom (on github) and detailed instructions. Everything in the photo is included. I purchased this part from this link here:
https://www.aliexpress.com/item/Mark-2-board-hotend-extruder-kit-for-Ultimaker-2-3d-printer-dual-extrusion-full-kit/32829918859.htmlI gave this kit to 2 people to try out and they both said the same thing. Everything worked perfectly except the print head fans. You will need to get the 2 print head cooling fans (not the 3rd head cooling fan - just the side 2 fans) yourself. I also tested the fans myself and indeed they do not work. So I recommend you get the part number off your existing fans and order 2 of them through digikey. Or possibly fbrc8.com if you want them with the connectors already mounted.
FOR USA CUSTOMERS ONLY - OTHER CUSTOMERS PLEASE ORDER THROUGH aliexpress.com Learn More
-
$25.00ALL BATH INTERFEROMETER PRODUCTS HAVE BEEN MOVED TO MY NEW STORE HERE:
https://thegr5store.com/wp/For people who already have a 3d printer.The metal parts you need to build a nice XYZ stage for a Bath Interferometer or optical stage.
Missing:- plastic parts
- interferometer
- tools including a metal file
- 9/64 inch and 5/32 inch drill bits
- 1/4 inch stainless rods precut to fit
- brass tubing pieces to go around the 1/4 inch rods
- precut 6-32 threaded rods
- 3 6-32 nuts
- 6 6-32 lock nuts
- a long 6-32 screw for purposes of tapping the plastic parts
- two short M3 screws that will hold down equipment to the top of the XYZ table
-
$55.00EXPERTS ONLY - 0.10mm JET RSB Nozzle. Compatible with e3d v6 nozzles designed for 3mm filament although this will work with 1.75mm filament also. Learn More -
$68.00For Prusa I3 Mk3.
3DSolex is out of silicone socks so if you don't have any there are plenty of other ways to get those.
This sensational kit for the Prusa I3 Mk3 will transform your printer.
Safely change nozzle using our tools included in kit.
Ramp up plastic output thanks to our patented core heating nozzles and fully utilizing the Bondtech feeder already installed in your printer. By combining nozzle size, layer height and speed you can achieve up to 30 cubics / second.
Learn More