Search results for 'steel'
-
$18.90Much more resistant to breaking. Precisely engineered. If you lose the original on the floor, it may break or bend. When turning, it may break.The V2 is much stronger. Learn More -
$18.90Insulator - for Ultimaker2 - goes between white teflon isolator and heater block (Olsson or Ultimaker). Learn More -
$95.00DDG Extruder for Ultimaker2 that feeds filament without grinding and with a very firm grip of the filament that will allow for faster printing without under-extrusion problems and also high retraction prints like Voroni models without grinding. Learn More -
Regular Price: $10.90
Special Price $9.80
Slippery “ICE” nozzle, with brass core. Optimized for surface prints. Max temp 275C. First 2 hours max 220C to temper the nozzle. Super Easy Cold-Pulls! Has an outer geometry optimized for surfaces. This is a brass nozzle (excellent temperature properties) with a hard slippery “ICE” coating. This coating prevents hot plastic from sticking to it! If you heat it to more than 275C, it destroys this function and the nozzle acts like a “normal” nozzle. IMPORTANT: This ICE nozzle looks like a (dark) steel nozzle, but it is a brass nozzle! This means it prints just like a standard brass nozzles (several times faster than steel nozzles). Fits UM2, UM2+, Olsson Block, Matchless V3 Learn More -
Regular Price: $10.90
Special Price $9.80
Slippery “ICE” nozzle, with brass core. Optimized for surface prints. Max temp 275C. First 2 hours max 220C to temper the nozzle. Super Easy Cold-Pulls!Has an outer geometry optimized for surfaces. This is a brass nozzle (excellent temperature properties) with a hard slippery “ICE” coating. This coating prevents hot plastic from sticking to it! If you heat it to more than 275C, it destroys this function and the nozzle acts like a “normal” nozzle.
IMPORTANT: This ICE nozzle looks like a (dark) steel nozzle, but it is a brass nozzle! This means it prints just like a standard brass nozzles (several times faster than steel nozzles). Fits UM2, UM2+, Olsson Block, Matchless V3 Learn More
-
$12.20 As low as: $12.000.5mm Steel nozzle! Meant for printing abrasive materials. Learn More -
$19.00SS ICE coated nozzle does not stick to your filament! Will not carry blobs of PLA or any other filament around your print! Super easy Cold Pull! 0.50mm size can have an advantage with certain difficult, fibrous filaments, less clogging. Lasts even longer than stainless steel nozzles. For some users it will “payback” after first use! For UM2/ UM2+ Learn More -
Regular Price: $10.90
Special Price $9.80
Slippery “ICE” nozzle, with brass core. Optimized for surface prints. Max temp 275C. First 2 hours max 220C to temper the nozzle. Super Easy Cold-Pulls! Has an outer geometry optimized for surfaces. This is a brass nozzle (excellent temperature properties) with a hard slippery “ICE” coating. This coating prevents hot plastic from sticking to it! If you heat it to more than 275C, it destroys this function and the nozzle acts like a “normal” nozzle. IMPORTANT: This ICE nozzle looks like a (dark) steel nozzle, but it is a brass nozzle! This means it prints just like a standard brass nozzles (several times faster than steel nozzles). Fits UM2, UM2+, Olsson Block, Matchless V3 Learn More