Welcome to gr5 store

Home Page (united states reseller of 3dsolex parts for ultimaker2 ultimaker2+ Ultimaker3 UM3 UM2 UM2+ Raise3D including upgrades, olsson block, nozzles, teflon isolators, extra hard and steel nozzles, ruby nozzles, sapphire nozzles everlast nozzles and more)

 

If you have any questions/comments please contact us at thegr5store _at_ gmail.com.

If you don't live in USA, Canada, or Mexico please go here for all of the same Ultimaker parts such as nozzles and heater blocks.

Grid List

Set Descending Direction

1-10 of 41

  1. EVERLAST 0.25mm nozzle for UM2, Raise3D, Printrbot, Lulzbot and others
    $70.20
    Super hard nozzle. Made from ruby or sapphire. Sapphire and ruby are one level softer on the hardness scale from Diamond. Print many spools of CF filament with no wear.

    These work on UM2, UM2+ and will work on UMO if you change or remove the fan shroud and readjust Z home position.

    Also compatible with Raise3D, Printrbot, Lulzbot. These are e3dv6 style compatible nozzles. Learn More

  2. Ultimaker 3 core - Hardcore  with Seven Nozzles
    $280.00
    100% 3DSolex parts.

    You get a complete core already upgraded to include the 3DSolex hardcore heater block which lets you change nozzles. Included nozzles:

    • .25mm
    • .40mm ICE Coated X2 (race)
    • .50mm steel
    • .60mm (race)
    • .80mm (race)
    • 1.0mm (race)

    If I run out of red heatsinks you might get a gold one instead. Learn More

  3. Ultimaker 3 core - Hardcore  with Four Nozzles
    $220.00
    100% 3DSolex parts.

    You get a complete core already upgraded to include the 3DSolex hardcore heater block which lets you change nozzles. Included nozzles:

    • .25mm
    • .40mm ICE coated(race)
    • .60mm (race)
    • .80mm (race)

    If I run out of red heatsinks you might get a gold one instead. Learn More

  4. TL Smoother - removes zebra stripes
    $11.00
    From triangle lab - kit contains what you need to smooth 4 steppers (e.g. x,y,z,e axes) Remove zebra stripes! Works on many different stepper drivers. Explanation of how it works is here: http://www.engineerination.com/2015/02/drv8825-missing-steps.html?m=1 This doesn't remove every issue with your printer but it fixes a problem where one or two microsteps don't move the stepper. Typically every 16th step is lost and then the next step moves twice as far. Learn More
  5. HardCore Everlast 1.2mm nozzle for UM3
    $77.20
    Super hard nozzle. Made from ruby or sapphire. Sapphire and ruby are one level softer on the hardness scale from Diamond. Print many spools of CF filament with no wear.

    You must have the 3DSolex Hardcore to use this nozzle.

    These work on UM3 only. Learn More

  6. Ultimaker 3 core upgrade - HardCore upgrade with 4 nozzles
    $189.00
    You must send me your core - I will upgrade and send it back. Step 1 is to place your order, then postal mail your core to: thegr5store 21 Howe St Wellesley, MA 02482 If you don't mind the extra 2 or 3 day delay I can mail you a free pre-paid United States Post Office padded envelope. Contact me at thegr5store _at_ gmail.com If I run out of red heatsinks you might get a gold one instead. Learn More
  7. UMO/UM2/UM3 Bowden Tube Super-Slip
    $21.60
    Not transparent! This is much more slippery than the normal bowden. Good for flexible filaments. Good for PLA. It's just amazing how much more slippery this is.

    Compatible with UMO, UM2, UM2+, UM3 Feeder end has tape.

    Bowden clips included! Learn More

  8. Heated Bed Kit for UM2GO

    Regular Price: $106.80

    Special Price $90.00

    Wow - heated bed conversion kit for UM2GO! Includes everything you need: Peel-and-stick heater with temp sensor, new nozzle heater, firmware. I don't have very many of these yet so decide soon! Instructions and more details are here. Learn More
  9. Ultimaker2 plus upgrade kit

    Starting at: $9.60

    It's not the one from Ultimaker. This is my version of their upgrade kit. Much less expensive - please read description below.

    Set qty to zero for what you already have or don't want and then "add to cart".

    PLEASE READ FULL DESCRIPTION BELOW. Learn More

  10. 1.75mm block v3 conversion kit
    $71.00
    For tinkerer's only. Read long description below! This kit includes a 1.75mm block v3, one 1.75mm TFT 255C teflon isolator but no bowden and no nozzles (nothing else is needed other than a nozzle really but you should print the iRoberti feeder before installing this kit).

    If you don't have the Olsson block (I believe all UM2 and UM2+ bought since January 2016 have this) then you need to get at least one nozzle also. Learn More

Grid List

Set Descending Direction

1-10 of 41