Welcome to gr5 store

1.75mm filament products

Products related to 1.75mm filament

Grid List

Set Descending Direction

10 Item(s)

  1. 0.25mm matchless nozzle for 1.75mm filament
    $17.00
    Compatible with 1.75mm Olsson block, 1.75mm block v3, printrbot UBIS 13S, Raise3D or other e3dv6 nozzles.

    For 1.75mm filament (not 3mm filament).

    If you use this nozzle on an ultimaker you must have a 1.75mm filament Olsson block or block v3 (a conversion kit).

    Works also with Raise 3D N2 printers. Learn More

  2. 0.40mm matchless nozzle for 1.75mm filament
    $17.00
    Compatible with 1.75mm Olsson block, 1.75mm block v3, printrbot UBIS 13S, Raise3D or other e3dv6 nozzles.

    For 1.75mm filament (not 3mm filament).

    If you use this nozzle on an ultimaker you must have a 1.75mm filament Olsson block or block v3 (a conversion kit).

    Works also with Raise 3D N2 printers. Learn More

  3. 0.60mm matchless RACE nozzle for 1.75mm filament
    $17.00
    Race nozzles heat filament much more thoroughly than regular matchless nozzles due to their internal structure. Allows you to print at lower temperatures or faster. Compatible with 1.75mm Olsson block, 1.75mm block v3, printrbot UBIS 13S, Raise3D or other e3dv6 nozzles.

    For 1.75mm filament (not 3mm filament).

    If you use this nozzle on an ultimaker you must have a 1.75mm filament Olsson block or block v3 (a conversion kit).

    Works also with Raise 3D N2 printers. Learn More

  4. 0.80mm matchless RACE nozzle for 1.75mm filament
    $17.00
    Race nozzles heat filament much more thoroughly than regular matchless nozzles due to their internal structure. Allows you to print at lower temperatures or faster. Compatible with 1.75mm Olsson block, 1.75mm block v3, printrbot UBIS 13S, Raise3D or other e3dv6 nozzles.

    For 1.75mm filament (not 3mm filament).

    If you use this nozzle on an ultimaker you must have a 1.75mm filament Olsson block or block v3 (a conversion kit).

    Works also with Raise 3D N2 printers. Learn More

  5. 1.0mm matchless RACE nozzle for 1.75mm filament
    $17.00
    Heats filament much more thoroughly than regular matchless nozzles due to it's internal structure. Allows you to print at lower temperatures or faster. Compatible with 1.75mm Olsson block, 1.75mm block v3, printrbot UBIS 13S, Raise3D or other e3dv6 nozzles.

    For 1.75mm filament (not 3mm filament).

    If you use this nozzle on an ultimaker you must have a 1.75mm filament Olsson block or block v3 (a conversion kit).

    Works also with Raise 3D N2 printers. Learn More

  6. 1.5mm matchless RACE nozzle for 1.75mm filament
    $17.00
    Heats filament much more thoroughly than regular matchless nozzles due to it's internal structure. Allows you to print at lower temperatures or faster. Compatible with 1.75mm Olsson block, 1.75mm block v3, printrbot UBIS 13S, Raise3D or other e3dv6 nozzles.

    For 1.75mm filament (not 3mm filament).

    If you use this nozzle on an ultimaker you must have a 1.75mm filament Olsson block or block v3 (a conversion kit).

    Works also with Raise 3D N2 printers. Learn More

  7. 2.0mm matchless RACE nozzle for 1.75mm filament
    $17.00
    Nozzle bigger than filament!!! This works fine due to the inner geometry of the nozzle. Race nozzles heat filament much more thoroughly than regular matchless nozzles due to their internal structure. Allows you to print at lower temperatures or faster. Compatible with 1.75mm Olsson block, 1.75mm block v3, printrbot UBIS 13S, Raise3D or other e3dv6 nozzles.

    For 1.75mm filament (not 3mm filament).

    If you use this nozzle on an ultimaker you must have a 1.75mm filament Olsson block or block v3 (a conversion kit).

    Works also with Raise 3D N2 printers. Learn More

  8. 0.6mm e3dv6 nozzle for 1.75mm filament
    $8.00
    Compatible with 1.75mm Olsson block or other e3dv6 nozzles.

    For 1.75mm filament (not 3mm filament).

    If you use this nozzle on an ultimaker you must have a 1.75mm filament Olsson block (a conversion kit). Learn More

  9. TFT 1.75MM
    $18.90
    For people who already have the 1.75mm conversion kit but need to replace the teflon part. I mean in theory this *might* work by itself without the 1.75mm block - I don't know.

    Replaces Ultimaker2 teflon part but this part can print at 255C continuous for years. Never replace your teflon part again. This is made of teflon but it's a high temperature teflon. Learn More

  10. UMO TFT for 1.75mm filament
    $18.90
    Convert to 1.75mm! This is experimental. I haven't tried it - I don't know if anyone has. I'm not sure if changing this part alone is enough - it seems like it should be as on the UM2 you only have to change the heating block and the teflon part - certainly you don't need to change the bowden. So I think it will work.

    Replaces Ultimaker Original (not Ultimaker2) teflon part but this part can print at 255C continuous for years. Never replace your teflon part again. This is made of teflon but it's a high temperature teflon. Learn More

Grid List

Set Descending Direction

10 Item(s)